The MAF-type of Inter-Connector, developed for small height connections and testing substrates of PCB’s or FPC’s and electronic components, is a anisotropic sheet of silicone rubber with brass fibers dispersed in the Z-axis. The protruded surfaces of the bras fibers are gold plated.
Custom designs are generated by punching out required shapes from standardized sheet sizes. Additional adhesive layer are available to ease assembly. Fibers protrude the adhesive layer.
MAF Type Dimensions
Full data in download| Parameter | Unit | Value |
|---|---|---|
| Sheet thickness | mm | 0.2/ 0.3/ 0.4/ 0.5 |
| Length | mm | 1 ~ 300 |
| Width | mm | 1~ 50 |
| Conductive fiber diameter | µm | 30 |
MAF Type Properties
Full data in download| Parameter | Unit | Value |
|---|---|---|
| Shore hardness A | ISO7619A | 65 ~ 73 |
| Compression set | % | 30 ~ 35 |
| Current carrying capacity | A/mm2 | 1 |
| Contact resistance | Ω/mm2 | ≤ 0.1 |
| Dielectric breakdown voltage | kV/mm | 23 ~ 27 |
| Isolation resistance (500V DC) | MΩ | > 10^3 |
| Operating temperature range | °C | -25 ~ 85 |
