SX-type of Inter-Connector

The SX-type of Inter-Connector, developed for very fine pitch large monochrome dot-matrix STN LCD panels, is basically a ultra fine pitch S-type with both sides softer isolative support material to ease compression and reduce compression force.

The SX-type is keeping the resistance low by using low resistance carbon particle material as conductor and a wide conductive core section. The SX-type can be used for some board to board connections due to it's low resistance.

 

Outline Dimensions and application
   
 SX-type  Dot-matrix LCD connection

 

Dimensions and Tolerances
   

 Unit

 0.03P
 Pitch  P  mm  0.03 +0.03/-0.01
 Length  L  mm  2.0 ~ 20.0 ± 0.15
 20.1 ~ 90.0 ± 0.65%
 90.1 ~ 150.0 ± 0.6
 150.1 ~ 200.0 ± 0.8
 200.1 ~ 300.0 ± 1.0
 Height (H ≥ W/2)  H  mm  1.5 ~ 5.0 ± 0.1
 5.1 ~ 20.0 +0.15/-0.1
 Width  W  mm  1.5 ± 0.1
 2.0 ±0.1
 2.5 ±0.15
 3.0 ±0.15
 3.5 ±0.15
 4.0 ±0.15
 4.5 ±0.15
 5.0 ±0.15
 Width conductive core  Z  mm  0.7 ± 0.05

 

Basic Properties
     Unit  SX-35° type
 Shore hardness A  Isolator
 Conductor
 Side isolation 20° (1)
 Side isolation 35° (1)
 ISO7619A  65 ~ 73
 60 ~ 65
 20 ~ 25
 35 ~ 40
 Compression set  *  %  15 ~ 20
 Volume resistance  Isolator
 Conductor
 Side isolation
 Ω.cm  1.0 • 1014
 0.5
 1.0 • 1011
 Dielectric breakdown voltage  Isolator
 Side isolation
 kV/mm  23 ~ 27
 23 ~ 27
 Isolation resistance (500V DC)  *  MΩ  > 1.0 • 103
 Operating temperature range    °C  -25 ~ 85

(1)Alternative hardnesses of support materials available.
* Tests carried out with Shin-Etsu standard methods.

Compression Curves
   
 samples size: SX 0.03P 50.0L 5.0H 2.6W 0.7Z
 electrode 1: 0.4 mm wide Au-plated Cu-track
 electrode 2: Au-plated Cu-plate, no holder
 samples size: SX 0.03P 50.0L 5.0H 2.6W 0.7Z
 
 

Note:
Shin-Etsu Inter-Connector has been registered in the European Community, TM No. 000299016, and in the United States of America, TM No. 2078941.
Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee.
Compression curves are for reference only. Actual resistances and compression forces are up to the design of substrates and holder constructions.
More information can be found in the design guides.
The quality of the assembled Inter-Connector is out of guarantee.
Please make sure to review the purpose and conditions of use and practice your own tests.
Industrial ownership like patent doesn't guarantee the usage of the Inter-Connector.