SP-type of Inter-Connector

The SP-type of Inter-Connector, developed for tall connection height applications, is basically an S-type with both sides softer isolative support material to ease compression and reduce compression force. 
The SP-type uses low resistance carbon particle material as conductor to keep the resistance low. Other materials are same as for the SS-type.

 

Outline Dimensions and application
 SP-type  LCD connection

 

Dimensions and Tolerances
   

 Unit

 0.05P  0.10P
 Pitch  P  mm  0.05±0.03  0.10±0.04
 Length  L  mm  2.0 ~ 20.0 ± 0.15
 20.1 ~ 90.0 ± 0.65%
 90.1 ~ 150.0 ± 0.6
 150.1 ~ 200.0 ± 0.8
 200.1 ~ 270.0 ± 1.0
 Height (H ≥ W/2)  H  mm  1.0 ~ 5.0 ± 0.1
 5.1 ~ 20.0 +0.15/-0.1
 Width  W  mm  1.2 ~ 2.3 ± 0.1
 2.4 ~ 4.0 ±0.15
 Width conductive core  Z  mm  0.3 ± 0.05
 0.6 ± 0.05

 

Basic Properties
     Unit  0.05P  0.10P
 Specific gravity  Isolator
 Conductor
 Side isolation
   1.15
 1.25
 1.05
 1.15
 1.25
 1.05
 Shore hardness A  Isolator
 Conductor
 Side isolation
 ISO7619A  65 ~ 73
 60 ~ 65
 20 ~ 25
 65 ~ 73
 60 ~ 65
 20 ~ 25
 Compression set *    %  15 ~ 20  12 ~ 18
 Volume resistance  Isolator
 Conductor
 Side isolation
 Ω.cm  1.0 • 1014
 1.3
 0.8 • 1014
 1.0 • 1014
 1.3
 0.8 • 1014
 Dielectric breakdown voltage  Isolator
 Side isolation
 kV/mm  23 ~ 27
 23 ~ 27
 23 ~ 27
 23 ~ 27
 Isolation resistance (500V DC) *    MΩ  > 1.0 • 103  > 1.0 • 103
 Operating temperature range    °C  -25 ~ 85  -25 ~ 85

* Tests carried out with Shin-Etsu standard methods.

Compression Curves
   
 samples size: 0.05P 50.0L 5.0H 2.6W 0.3Z
 
 
 samples size: 0.05/0.1P 50.0L 5.0H 2.6W 0.3Z
 electrode 1: 0.4 mm wide Au-plated Cu-track
 electrode 2: Au-plated Cu-plate, no holder
 samples size: 0.05/0.1P 50.0L 5.0H 2.6W 0.3Z
 electrode 1: 0.4 mm wide Au-plated Cu-track
 electrode 2: Au-plated Cu-plate, no holder

Note:
Shin-Etsu Inter-Connector has been registered in the European Community, TM No. 000299016, and in the United States of America, TM No. 2078941.
Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee.
Compression curves are for reference only. Actual resistances and compression forces are up to the design of substrates and holder constructions.
More information can be found in the design guides.
The quality of the assembled Inter-Connector is out of guarantee.
Please make sure to review the purpose and conditions of use and practice your own tests.
Industrial ownership like patent doesn't guarantee the usage of the Inter-Connector.