AF-type of Inter-Connector

The AF-type of Inter-Connector, developed for small height connections and testing substrates of PCB's or FPC's, is a anisotropic sheet of silicone rubber with carbon fibers dispersed in the Z-axis.

Custom designs are generated by punching out required shapes from standardized sheet sizes. Additional adhesive layer are available to ease assembly. Fibers protrude the adhesive layer.

Outline Dimensions and application
     
 AF-type  FPC connection in camera PCB tester

  

Dimensions and Tolerances
   

 Unit

 
 Sheet thickness  T  mm  0.2 ± 0.05
 0.3 ± 0.05
 Length*  L  mm  1.0 ~ 170.0
 Width*  W  mm  1.0 ~ 170.0
 Conductive fiber diameter    µm  3 ~ 20  

* Dimensions over 170.0 mm available on request

Basic Properties
   Unit  
 Shore hardness A  ISO7619A  65 ~ 73
 Compression set *  %  30 ~ 35
 Contact resistance  Ω/mm2  ≤ 10
 Dielectric breakdown voltage  kV/mm  23 ~ 27
 Isolation resistance (500V DC) **  MΩ  > 1.0 • 103
 Operating temperature range  °C  -25 ~ 85

* Tested 3000 hrs at room temperature.
** 500 V DC is applied at the area between minimum electrode sizes shown in graph below.

Compression Curves
   
 sample size: 0.2T 10 x 50 mm  samples size: 0.2T
 electrodes Au-plated Cu-plate

Note:
Shin-Etsu Inter-Connector has been registered in the European Community, TM No. 000299016, and in the United States of America, TM No. 2078941.
Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee.
Compression curves are for reference only. Actual resistances and compression forces are up to the design of substrates and holder constructions.
More information can be found in the design guides.
The quality of the assembled Inter-Connector is out of guarantee.
Please make sure to review the purpose and conditions of use and practice your own tests.
Industrial ownership like patent doesn't guarantee the usage of the Inter-Connector.