For mounting Shin-Etsu heatseal Inter-Connectors, special bonding equipment is required.
As a component supplier, Shin-Etsu Polymer keeps close relations with equipment manufacturers that offer heatseal machines.
Generally, 2 types of equipment can be seen:
* Constant heat machines, using a heater block that is permanently heated for fast bonding cycles. A hot, heatconductive silicone rubber cushion will transfer bonding heat to the application.
* Pulse heater machines, based on solder equipment technology, heating up a thermode by electric current and cooling down the bonding area at the end of the heatseal process cycle. The slightly longer process cycle provides extra strength of the bond. This system is particularly popular for automotive applications.
Pulse heater machine suppliers:
Dieter Rücker GmbH
Miyachi Europe BV
Schootense Dreef 21
5708 HZ Helmond
Simple system with rotation table.
Integrated system line.
Shin-Etsu Inter-Connector has been registered in the European Community, TM No. 000299016, and in the United States of America, TM No. 2078941.
Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee.
Compression curves are for reference only. Actual resistances and compression forces are up to the design of substrates and holder constructions. More information can be found in the design guides.
The quality of the assembled Inter-Connector is out of guarantee.
Please make sure to review the purpose and conditions of use and practice you own tests.
Industrial ownership like patent doesn't guarantee the usage of the Inter-Connector.